Diablo
Mesaje : 124
Puncte : 1352
Reputatie : 1
Data de inscriere : 15/06/2011
Varsta : 30
Localizare : TM
 |  Subiect: Tutorial Cum sa faci server de MuOnline Cu Router ! RomTelecom  Dum 27 Ian - 2:52:30 | |
| C:\MuServer\CS\Connectserverlist.dat ( Global Ip )
C:\MuServer\CS\data\Connectserverlist.dat ( Global Ip )
C:\MuServer\CS\data\ServerInfo.dat ( Global Ip )
C:\MuServer\CS\data\ServerList.dat ( Global Ip )
Open this file with ''NotePad'' or ''WordPad'' , change the ''127.0.0.1'' into ur global ip.
Now the CS is done , than go this :
C:\MuServer\data\commonserver.cfg ( Local Ip Start>Run>cmd>ipconfig )
C:\MuServer\data\IpList.dat ( Global Ip )
C:\MuServer\data\lang\chs\commonloc.dat ( Local Ip Start>Run>cmd>ipconfig )
In these files press : ''Ctr+F'' put ''127.0.0.1'' and replace it in ur Local Ip like told here before.
Other files u have to change into ip's are :
C:\MuServer\Links\4.ink ( Local Ip . Start>Run>cmd>ipconfig )
C:\MuServer\Links\8.ink ( Local Ip . Start>Run>cmd>ipconfig )
In the 4.ink u have to press ; right click , proppeties , and u will see ''127.0.0.1'' overwrite it with ur local ip.
Do the same with 8.ink but this file has 2 ip's ''127.0.0.1'' overwrite both with ur local ip.
Than go : C:\Windows\system32\drivers\etc\
Open the ''Host file'' and u will see the followed information :
# Copyright (c) 1993-1999 Microsoft Corp.
#
# Dit is een voorbeeld HOSTS-bestand dat wordt gebruikt door Microsoft TCP/IP for Windows.
#
# Dit bestand bevat de toewijzingen van IP-adressen naar hostnamen. Elke vermelding
# moet op een afzonderlijke regel staan. Het IP-adres dient in de eerste kolom te worden
# geplaatst, gevolgd door de bijbehorende hostnaam. Het IP-adres en de hostnaam dienen
# gescheiden te zijn door ten minste één spatie.
#
# Daarnaast kunnen opmerkingen (zoals deze) worden toegevoegd op extra
# regels of gevolgd door de computernaam, voorafgegaan door een #.
#
# Bijvoorbeeld:
#
# 102.54.94.97 rhino.acme.com # bronserver
# 38.25.63.10 x.acme.com # x clienthost
127.0.0.1 localhost
Below the 127.0.0.1 localhost write ur local ip and ur dns
For Example : 127.0.0.1 localhost
192.168.xx.xx mydns.no-ip.org
This is optional for router users. This file should be added else people get dc after few seconds.
After that go : Start>Control Panel>HardWare and install ''Microsoft Loopback Adaptor''
When u've done that go to ur lan connection map Wich can be found in ur Control Panel either.
See : ''Microsoft Loopback Adaptor'' and press ''Proppeties''.
Than press ''Internet-Protocols [TCP/IP]'' and press ''Proppeties''
U will see three lines :
IpAdress : global ip : ''[Trebuie sa fiti inscris si conectat pentru a vedea acest link]
SubnetMask: 255 0 0 0 ( for expample u can find : Start>Run>CMD>ipconfig )
Default GateAway: ur lan ip : ''Start>Run>cmd>ipconfig''
Than Press : Ok 2 times until the window is gone.
Than go : Start>Run>cmd>ipconfig and look after ur lan ip like : Default GateAway..... !
Put ur lan ip in ''IE'' = Internet Explorer like : [Trebuie sa fiti inscris si conectat pentru a vedea acest link]
Than u have to forward some ports in ur router.
If u don't know how to forward the ports go [Trebuie sa fiti inscris si conectat pentru a vedea acest link]
Open the followed ports :
55901 TCP
44405 TCP
* Hint *
If u changed ur connectserver port like 54321 u must open ''54321'' tcp!
Now the ip section is done. | |
|
